Introduction:
Nickel foam is a sound-absorbing material with excellent performance, which has a high sound-absorption coefficient at high frequencies; its sound-absorbing performance at low frequencies can be improved through the design of the sound-absorbing structure. Nickel foam is also one of the best electrode materials for making cadmium-nickel batteries and hydrogen-nickel batteries. Nickel foam is a sound-absorbing material with excellent performance, which has a high sound absorption coefficient at high frequencies; the sound absorption performance at low frequencies can be improved through the design of the sound-absorbing structure.
Features:
1. Mass and light: maximum surface area, specific gravity 0.2-0.3, 1/4, wood 1/3. Aluminum and iron 1/30, 1/10 the mass of water and light.
2. Sound absorption: The porous structure has a wide frequency sound absorption characteristic.
3. Electronic wave shield: shielded by a relatively thin electronic wave with a thickness of about 90 db.
4. Processability: It can be lowered, bent, and easily adhered.
5. High temperature refractory: The stable form is difficult to burn, high temperature.
6. Recycling: Metal waste can be recycled 100%.
7. Thermal conductivity: The thermal conductivity of porous materials is strong.
8. Breathable: Uniform three-dimensional network structure, the function of a filter, super stable gas and fluid flow and performance.
9. Insulation: With additional processing, high noise shielding can be obtained, and the sound insulation effect is good.
10. Exquisite appearance, interior and practice: Suitable for interior decoration through various treatments.
11. The temperature is 1100 degrees, resistant to various acid corrosion, good permeability, fast and uniform pore structure, and heating heat.
Parameter:
| Material | Nickel Foam |
| Purity | > 99.99%(excellent anti-corrosive) |
| Surface Density | 346g/m2 |
| Length | 1m |
| Width | 300mm |
| Thickness | 1.6 mm |
| Net weight | 104g |
| Porosity | ≥95% (80-110 Pores per Inch. average hole diameters about 0.25mm) |
| Extensibility | Lengthwise≥5%; Widthwise≥12% |
| Tensile Strength | Lengthwise≥1.25N/mm^2; Widthwise≥1.00N/mm^2 |
Production Process:
The process of preparing foamed nickel by electrodeposition technology has been successfully developed through experiments. The substrate material used is porous open-cell foam plastic, and the conductive layer can be prepared by three methods: electroless nickel plating, vacuum nickel plating, and dipping conductive glue (palladium sol, submicron graphite emulsion, etc.), and can be pre-plated. Thick nickel is electroplated in the general sulfate nickel plating electrolyte, and then the three-dimensional network foam nickel material with excellent performance can be obtained after burning, reducing and annealing processes.
Application:
1. Battery electrode materials
Nickel foam is mainly used for battery electrode materials, especially for NiMH batteries, which are widely used in laptop computers, mobile phones, electric scooters, electric bicycles, and hybrid vehicles.
2. Fuel cells
The usual operating temperature of molten carbonate fuel cells is between 550-700°C, and nickel foam can be used as an electrocatalyst for molten carbonate fuel cells.
3. Catalyst material
The unique opening structure, low-pressure input hole, inherent tensile strength and thermal shock resistance make nickel foam a catalyst carrier for automotive catalytic converters, catalytic combustion, and black smoke purifiers for diesel vehicles.
4. Other
Nickel foam can be used as a filter material, a magnetic current conductor for magnetic particles in fluids. Other applications include applications in hydrogen storage media, heat exchange media.
| | | |
0.5mm to 1.7mm*200mm*300mm | | |
| | | |
| | | The size can be customized |
contact us
email:victory@dlx-alloy.com
Oem service:
Welcome customized size
We are experience factory for OEM&ODM service
FAQ:
What is nickel foam?
Nickel foam is a porous metal material with a connected pore structure, similar to a sponge-like morphology.
What are the applications of nickel foam in the field of electrochemistry?
Nickel foam can be used as battery electrode materials, such as anode materials in nickel-metal hydride batteries and fuel cells.
How is nickel foam prepared?
Nickel foam is usually made by adding a foaming agent to the nickel solution, and then forming a porous structure at high temperature or room temperature through chemical reaction or electrochemical method.
Product Tags:
|
|
High Purity Nickel Metal Foam For Lab Lithium Ion Battery Electrode Material Images
|
